Cerma STM-3 Treatments versus Cerma STM-3 Motor Oils and Fluids | cermatreatment.com
Cerma STM-3 Treatments versus Cerma STM-3 Motor Oils and Fluids

 

FOR BEST PERFORMANCE AND MAXIMUM OIL LIFE, FOLLOW THE CERMA PROTOCOL:

  1. Add Cerma STM-3 Treatment 2. Drive 1,500 miles - the longer the better (3,000 miles for trucks) 3.  Change Oil using Cerma Brand Motor Oil and Fluids

Your part of the process is now complete. Over the next 90 days of driving, the Cerma process will complete on its own.

IMPORTANT: DO NOT ADD TREATMENT AND OIL AT THE SAME TIME!

Follow the Cerma Protocol with Cerma Treatments and Cerma Motor Oils and Fluids and you will get ultimate savings, value, protection, and performance.

Straight from the start you will see, hear and feel the difference after using Cerma Engine products. By the time the Cerma process is complete, your engine will be at its peak performance, have that extra horsepower, run quieter and smoother, and start to benefit from longer oil life and protection, and increased fuel economy.

Cerma Treatments act quickly to restore, clean, lubricate and protect by using the oil as a carrier. All treatments are designed to release into the system over time (see specific instructions for drive times on each treatment).  During this timed release, Cerma Treatments will restore, clean, lubricate and protect.  All Cerma Treatments are “One Time” treatments, meaning if you start to restore your vehicle’s performance utilizing a Cerma Treatment, and you keep your vehicle in peak operating performance, you will unlikely need to re-treat any system.

Note:   Cerma STM-3 Treatments are “One Time” Treatments.  If switching over to Cerma Motor Oils and Fluids, you do not need to add additional treatment as Cerma Oils include the Cerma STM-3 technology in their additive pack.  If running on NON Cerma Oils, additional maintenance dosages may be helpful pending mileage, driving habits, conditions, and vehicle.  Contact Cerma when you feel your vehicle needs another boost.

The BEST way to maintain peak operating performance is to utilize Cerma Oils/Fluids after treating your vehicle with a Cerma Treatment:

Always feel free to contact Cerma at any time for any specific case or need.

Cerma STM-3 Manual Transmission Treatment Cerma STM-3 Gear Oil

Cerma STM-3 Automatic Transmission Treatment Cerma STM-3 Automatic Transmission Fluid

Cerma STM-3 Engine Treatment Cerma STM-3 Motor Oil

All Cerma products come in both Treatment and Oil/Fluid form.  Cerma Treatments and Cerma Oils work INDEPENDENTLY of each other and can be used separately in all cases.

Cerma stm-3 treatments versus cerma stm-3 motor oils and fluids

Leave a comment

All comments are moderated before being published