Why settle for minimal lubrication protection when you could have Cerma's Advanced Lubrication Protection?
Why settle for minimal lubrication protection when you could have Cerma's Advanced Lubrication Protection?
Unlike traditional engine oil additives,does more than just coat. Cerma STM-3 Treatment actually penetrates your engine's internal metal parts to
eliminate engine generated destructive harmonics, noise and vibration, while increasing performance and improving gas mileage.
Cerma simultaneously cleans, and protects worn parts by creating a smoother, more durable surface without changing factory tolerances. Cerma STM-3 effectively
optimizes performance while reducing friction and wear.
Cerma has spent over 10 years validating every aspect of our treatment and the advanced science associated with Cerma STM-3. The application is simple, Cerma works
with our 100% active ingredient, STM-3®, applying a long-lasting Nano Silicon Carbide (SiC) matrix seal within the sub-surfaces of the engine. While you drive, Cerma
penetrates the metal surfaces 1 to 6 microns deep and forms this Silicon Carbide (SiC) matrix within the metal that is lapped to a perfect mating surface on the metal
as Cerma is curing within the sub-surfaces of the metal of the running assembly, engine, transmission or anything that requires lubrication.
By reducing friction and heat, Cerma's Advanced Technology provides similar benefits as traditional lubricants but works in a completely different way. Cerma STM-3
Engine Treatment does not modify the oil in any way. Instead, it modifies the surface structure of the metal to make it act like a ceramic surface. Cerma will create
a Silicon Carbide matrix within the metal surface (known for it's strength, durability, smoothness and high heat resistance properties). Silicon Carbide coatings
have been used for decades in racing, industry, aviation and nuclear propulsion. With STM-3®, a ceramic (SiC)-metal coating can now be applied to your engine,
transmission, rear axle or whatever equipment your treating with one simple application, no special tools & without dis-assembly. Cerma with STM-3® provides a huge
cost savings, with all the benefits of a ceramic engine. Seal the Steel™ with Cerma STM-3® and enjoy the performance that professional race engine builders,
aerospace engineers have known about for years, but at a fraction of the prior cost to achieve same results.
Cerma with STM-3® "Ceramic" Silicon Carbide (SiC) Metal Treatment is the best way to optimize your Engine or Transmission's overall performance without
dis-assembly. Once you treat your engine or transmission with Cerma Metal treatment, you will feel and hear the difference immediately! Your vehicle will run quieter
and more smoothly with improved performance. We are so certain that you will be impressed by the results, that all Cerma lubrication additives come with a 90-day, no
hassle money back guarantee! Did I mention that Cerma is a "1" time treatment
Simple 1- time engine treatment, treat the metal not the oil with Cerma with STM-3, you will hear and feel the difference within 20 minutes or less or get your
purchase price back! (Less shipping)
Cerma with STM3, is the only pure Synthetic SiC metal treatment, proven to substantially decreases friction, reduce damaging harmonics and wear in the engine.
*
Cerma with STM3 is not harmful in any way to your to plastics, rubber seals.
NOTE: VERY IMPORTANT!
You will also receive instruction sheet with your order, follow to the letter for positive results
Q-What's included in this purchase?
A-You will receive 1- 2.0oz. Bottle of advanced Cerma engine treatment.
.
Q-Where do I put this product? In my fuel or oil?
A-Cerma engine treatment is applied via the oil, although Cerma does not fully mix with oil--the oil will carry cerma to the metal components within your engine.
.
Q-Does Cerma require re-treatment?
A-In most cases Cerma is a ONE TIME application.
Extreme usages (in: racing,high Vibration, may require re-treatment
.
Q-What should I expect to see from this treatment?
A-your engine will become smoother, run with more power, depending on driving habits/conditions you should see fuel economy improvement, best of all the engine will
run better and longer than it would had you not used Cerma products saving thousands in repair/replacement of critical parts.
.
Questions? call Tech Support at 239-344-9861
Unlike traditional engine oil additives,does more than just coat. Cerma STM-3 Treatment actually penetrates your engine's internal metal parts to
eliminate engine generated destructive harmonics, noise and vibration, while increasing performance and improving gas mileage.
Cerma simultaneously cleans, and protects worn parts by creating a smoother, more durable surface without changing factory tolerances. Cerma STM-3 effectively
optimizes performance while reducing friction and wear.
Cerma has spent over 10 years validating every aspect of our treatment and the advanced science associated with Cerma STM-3. The application is simple, Cerma works
with our 100% active ingredient, STM-3®, applying a long-lasting Nano Silicon Carbide (SiC) matrix seal within the sub-surfaces of the engine. While you drive, Cerma
penetrates the metal surfaces 1 to 6 microns deep and forms this Silicon Carbide (SiC) matrix within the metal that is lapped to a perfect mating surface on the metal
as Cerma is curing within the sub-surfaces of the metal of the running assembly, engine, transmission or anything that requires lubrication.
By reducing friction and heat, Cerma's Advanced Technology provides similar benefits as traditional lubricants but works in a completely different way. Cerma STM-3
Engine Treatment does not modify the oil in any way. Instead, it modifies the surface structure of the metal to make it act like a ceramic surface. Cerma will create
a Silicon Carbide matrix within the metal surface (known for it's strength, durability, smoothness and high heat resistance properties). Silicon Carbide coatings
have been used for decades in racing, industry, aviation and nuclear propulsion. With STM-3®, a ceramic (SiC)-metal coating can now be applied to your engine,
transmission, rear axle or whatever equipment your treating with one simple application, no special tools & without dis-assembly. Cerma with STM-3® provides a huge
cost savings, with all the benefits of a ceramic engine. Seal the Steel™ with Cerma STM-3® and enjoy the performance that professional race engine builders,
aerospace engineers have known about for years, but at a fraction of the prior cost to achieve same results.
Cerma with STM-3® "Ceramic" Silicon Carbide (SiC) Metal Treatment is the best way to optimize your Engine or Transmission's overall performance without
dis-assembly. Once you treat your engine or transmission with Cerma Metal treatment, you will feel and hear the difference immediately! Your vehicle will run quieter
and more smoothly with improved performance. We are so certain that you will be impressed by the results, that all Cerma lubrication additives come with a 90-day, no
hassle money back guarantee! Did I mention that Cerma is a "1" time treatment
Simple 1- time engine treatment, treat the metal not the oil with Cerma with STM-3, you will hear and feel the difference within 20 minutes or less or get your
purchase price back! (Less shipping)
Cerma with STM3, is the only pure Synthetic SiC metal treatment, proven to substantially decreases friction, reduce damaging harmonics and wear in the engine.
*
Cerma with STM3 is not harmful in any way to your to plastics, rubber seals.
NOTE: VERY IMPORTANT!
You will also receive instruction sheet with your order, follow to the letter for positive results
Q-What's included in this purchase?
A-You will receive 1- 2.0oz. Bottle of advanced Cerma engine treatment.
.
Q-Where do I put this product? In my fuel or oil?
A-Cerma engine treatment is applied via the oil, although Cerma does not fully mix with oil--the oil will carry cerma to the metal components within your engine.
.
Q-Does Cerma require re-treatment?
A-In most cases Cerma is a ONE TIME application.
Extreme usages (in: racing,high Vibration, may require re-treatment
.
Q-What should I expect to see from this treatment?
A-your engine will become smoother, run with more power, depending on driving habits/conditions you should see fuel economy improvement, best of all the engine will
run better and longer than it would had you not used Cerma products saving thousands in repair/replacement of critical parts.
.
Questions? call Tech Support at 239-344-9861