Cerma STM-3 Canadian ETV Verified | Fuel Savings Certification
Canadian ETV Program Verification - Cerma STM-3
Cerma with STM-3 technology has been verified by the Canadian Environmental Technology Verification (ETV) Program for fuel savings performance.
[Keep your PDF embed here]
Performance Claim - Verified
The Cerma with STM-3 technology provides 2.1% fuel savings. This claim is based on testing conducted according to the SAE J1321 joint TMC/SAE Fuel Consumption Test Procedure - Type II (1986), which resulted in 2.1% fuel savings over the baseline for the test vehicle, a Class 8 engine truck.
Certification Details
| Certification | Details |
|---|---|
| Program | Canadian Environmental Technology Verification (ETV) |
| Company | OLA BREAU 88234 7227 - DBA CERMA |
| Technology | Cerma with STM-3 |
| Verified Claim | 2.1% fuel savings |
| Test Standard | SAE J1321 TMC/SAE Fuel Consumption Test |
Performance Conditions
The fuel consumption tests were performed on a high-speed test track (BMVTC) at the Transport Canada Motor Vehicle Test Centre in Blainville, Quebec. All testing was conducted by Program Innovation Transport (PIT)/FP Innovations of Pointe-Claire, Quebec during the Transport Category 5 September 2014.
Test Parameters
- Track: High-banked, parabolic oval (6.4 km / 4 miles)
- Test runs: 15 laps (approx. 100 km) with departure and arrival at same position
- Test procedure: SAE J1321 joint TMC/SAE Fuel Consumption Test Procedure - Type II
- Vehicle: Class 8 engine truck
- Measurement: Fuel consumption accurately measured by weighing temporary tanks before and after each trip
Technology Application
CERMA with STM-3 Technology is a fuel engine additive which, when applied to Class 8 Truck Engines, has the potential to increase fuel efficiency of the vehicle subjected to the technology treatment.
Why This Certification Matters
- Government verified – Independent third-party testing
- Industry standard testing – SAE J1321 is the recognized fuel economy test
- Real-world conditions – Tested on actual Class 8 trucks
- Documented savings – 2.1% fuel reduction verified
For Fleet Operators
A 2.1% fuel savings can translate to significant cost reductions for fleet operations. For a truck averaging 100,000 miles per year at 6 MPG with diesel at $4/gallon, this represents approximately $1,400 in annual fuel savings per vehicle.
Questions about Cerma STM-3 certification? Call 239-344-9861 or email Info@cermatreatment.com
