Testing and Verification

This page contains comprehensive third-party testing and verification documents for Cerma STM-3 and Blue Ice products, confirming performance claims through independent laboratory analysis.

Canadian ETV Program Verification

Performance Claim

The Cerma with STM-3 technology provides 2.1% fuel savings. This claim is based on the test conducted according to the SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II (1986), which resulted in 2.1% fuel savings over the baseline for the test vehicle, a Class 8 engine truck, using the Cerma with STM-3 technology according to the supplier's instructions (engine oil 340 grams (12 oz), power steering system 28 grams (1 oz), differential 170 grams (6 oz), front spindle 28 grams (1 oz) per wheel).

Available Verification Documents

Document	Description
ETV Verification	Canadian Environmental Technology Verification - 2.1% fuel savings confirmed
Fuel Savings Report	Independent fuel consumption testing results
Emissions Reductions	Third-party emissions testing documentation
Finnell Report	Detailed analysis and testing results
Fuel Consumption Test	SAE J1321 protocol testing data
Energotest Project	Energy efficiency verification
Blue Ice Energy Usage Test	A/C and refrigeration energy savings documentation
1992 Test Results	Historical testing documentation

Why Third-Party Testing Matters

• Independent verification – Testing not conducted by Cerma
• Standardized protocols – SAE J1321 and other recognized procedures
• Government certification – Canadian ETV program verified
• Credible results – Objective assessment you can trust
• Documented proof – Full reports available for review

Testing Standards Used

• SAE J1321 – Joint TMC/SAE Fuel Consumption Test Procedure
• Canadian ETV Program – Environmental Technology Verification
• EPA/CARB Standards – Emissions testing protocols

Questions about Cerma testing and verification? Call 239-344-9861 or email Info@cermatreatment.com