Cerma Performance Racing Value Package, Including 2oz Automatic Transmission Treatment

CERMA PERFORMANCE RACING VALUE PACKAGE

Looking to boost your engine's performance to its peak operating levels? Look no further than the CERMA PERFORMANCE VALUE PACKAGE, available for a limited time only. By purchasing our top-of-the-line package, you can enjoy big savings compared to buying our Engine Treatment and Motor Oil individually.

The Performance/Racing Value Package includes:

• One (1) Cerma STM-3 2oz Engine Treatment

• Five (5) Quarts of CERMAX Synthetic Motor Oil (choose viscosity and additional oil quantity if needed)

Additional Options:

• One (1) 1oz Turbo Nano Treatment if Turbo/Induction option is chosen

• One (1) 2oz Transmission Treatment if Transmission option and type is chosen

The Cerma Protocol:

To get the best results from the CERMA PERFORMANCE VALUE PACKAGE, follow these steps:

I) For Regular Engines

1. Use the engine treatment first! Add the treatment to your existing oil (not Cerma Oil).

2. If your engine has less than 30,000 miles, add only 1oz of the Engine Treatment to your existing engine oil. If it has 30,000+ miles, add the full 2oz bottle. The best method to add the treatment to the engine oil is when the engine is warm and while it is running at idle. If there is blowback, shut off the engine, add treatment to oil, and immediately start the engine. After adding, do not shut off the vehicle. Idle at 2000 RPMs for 2 to 3 minutes, then drive for a minimum of 15 to 20 minutes. It is preferred to drive in city stop-and-go traffic for the first 10 minutes, then freeway or high-speed driving for 10 minutes. Cerma uses all RPM ranges to provide proper distribution of the technology.

3. Drive for a minimum of 1,500 miles after adding the engine treatment before the oil change interval (next step).

4. Change your oil using CERMAX Motor Oil (Do not use any other additives while using Cerma branded oils).

5. Your part of the process is now complete. Over the next 90 days of driving, the Cerma process will complete its process on its own.

***IMPORTANT: DO NOT add treatment and CERMAX oil at the same time! Add the treatment, drive a minimum of 1,500 miles, and then change your oil with CERMAX Motor Oil.

II) For Turbo, Supercharger, and Induction Drives:

1. Use the engine treatment first! Add the treatment to your existing oil (not Cerma Oil).

2. If your engine has less than 30,000 miles, add only 1oz of the Engine Treatment to your existing engine oil. If it has 30,000+ miles, add the full 2oz bottle. The best method to add the treatment to the engine oil is when the engine is warm and while it is running at idle. If there is blowback, shut off the engine, add treatment to oil, and immediately start the engine. After adding, do not shut off the vehicle. Idle at 2000 RPMs for 2 to 3 minutes, then drive for a minimum of 15 to 20 minutes. It is preferred to drive in city stop-and-go traffic for the first 10 minutes, then freeway or high-speed driving for 10 minutes. Cerma uses all RPM ranges to provide proper distribution of the technology.

3. Drive for a minimum of 1,500 miles after adding the engine treatment before the next step.

4. Add 1oz of Turbo Nano to hot engine oil. Drive as normal.

5. Drive for a minimum of 500 Miles.