cerma

Cermax Ceramic 0W-20 Synthetic Motor Oil 30K Mile | Cerma

Name: Cermax Ceramic 0W-20 Synthetic Motor Oil 30K Mile | Cerma
Brand: cerma
SKU: CMX-0W20-QT
Price: 20.82 USD
Availability: InStock

Cermax Ceramic 0W-20 Synthetic Motor Oil 30K Mile | Cerma

$20.82 USD

~~$24.44 USD~~ $20.82 USD

Sale Sold out

Shipping calculated at checkout.

Quantity

Cermax Ceramic 0W-20 Synthetic Motor Oil — STM-3 Nano Silicon Carbide Technology | Up to 30,000-Mile Oil Changes

Experience the world's first self-cleaning motor oil in the ultra-low viscosity that modern engines demand. Cermax Ceramic 0W-20 Synthetic Motor Oil is engineered with Cerma STM-3 Run Clean Technology featuring Nano Silicon Carbide (SiC) for up to 30,000-mile oil change intervals. This advanced ceramic synthetic oil permanently bonds a diamond-hard SiC matrix to metal sub-surfaces, continuously cleaning, protecting, and restoring your engine with every mile. 0W-20 delivers the fastest cold-start protection and maximum fuel efficiency demanded by today's newest engines — from hybrids and turbocharged four-cylinders to the latest full-size truck powerplants. Available in quart, gallon, case, pail, and drum sizes.

✅ Up to 30,000-Mile Oil Changes: Dramatically extends drain intervals — save time and money on maintenance
✅ Self-Cleaning Technology: STM-3 Run Clean Technology prevents sludge, carbon buildup, and deposit formation on metal surfaces
✅ Permanent Nano SiC Protection: Silicon Carbide particles continuously reinforce the ceramic bond with every oil change
✅ Ultra-Fast Cold Starts: 0W-20 flows instantly at sub-zero temperatures for immediate engine protection on startup
✅ Maximum Fuel Economy: Ultra-low viscosity reduces internal friction for the best possible fuel efficiency
✅ Restores Power & Compression: Fills microscopic wear in cylinder walls, restoring lost horsepower and torque
✅ Reduces Friction, Harmonics & Vibration: SiC ceramic technology for smoother, quieter engine operation
✅ Carbon & Moisture Guard: Triple protection against wear, deposits, and emissions
✅ Volume Discounts: Buy 2 and save 1.3% — buy in bulk for additional savings
✅ PTFE-Free & Solvent-Free: No Teflon, no solvents — environmentally safe formula made in the USA

🔬 What Makes Cermax Different from Every Other Motor Oil?

Conventional synthetic oils — even premium brands — simply lubricate. They sit between metal surfaces and reduce friction temporarily, but do nothing to permanently repair wear or prevent deposit formation at the molecular level. Cermax is fundamentally different. Its STM-3 technology applies a permanent Nano Silicon Carbide (SiC) matrix seal within the metal sub-surfaces of your engine. SiC has a Mohs hardness of 9.5 (nearly as hard as diamond) and a melting point of 2,730°C. This ceramic matrix continuously cleans engine surfaces, prevents contaminants from depositing on metal, and maintains peak performance mile after mile — which is why Cermax delivers 30,000-mile drain intervals while actually making your engine cleaner over time, not dirtier.

🌡️ Why 0W-20?

0W-20 is the fastest-growing viscosity grade in the automotive industry. Automakers increasingly specify 0W-20 because its ultra-low viscosity reduces internal engine friction, improving fuel economy while still providing full wear protection at operating temperature. If your owner's manual calls for 0W-20, this is the grade you need — and Cermax delivers it with 30,000-mile ceramic SiC technology that no other 0W-20 oil can match.

📦 Available Sizes

Size	Best For
Quart (32 oz)	Individual oil changes, top-offs between changes
12 Quart Case	Multiple oil changes, stocking up for long-term use
1 Gallon	Single oil changes for most 4-cylinder engines
4 Gallon Case	Multi-vehicle households, small shop supply
5 Gallon Pail	Shops, garages, and fleet maintenance
55 Gallon Drum	Commercial fleets, dealerships, high-volume shops

Use the Size dropdown above to select your preferred quantity. Volume discounts apply automatically when buying multiples.

🔬 How STM-3 Run Clean Technology Works

At the core of Cermax 0W-20 is Cerma STM-3 — the next generation lubricating oil with SiC (Run Clean) technology. The 100% active ingredient applies a permanent Nano Silicon Carbide (SiC) matrix seal within the metal sub-surfaces of your engine:

Self-Cleaning Action: Prevents contaminants from depositing on metal surfaces — your engine gets cleaner over time, not dirtier
Permanent Ceramic Bond: SiC particles bond to metal at the molecular level, creating a diamond-hard surface (Mohs 9.5)
Friction Reduction: Reduces metal-to-metal contact, lowering friction, harmonics, and vibration
Power Restoration: Fills micro-imperfections in cylinder walls, restoring horsepower and torque
Carbon Guard: Protects against performance-degrading sludge and abrasive carbon buildup
Moisture Guard: Superior protection against moisture contamination and corrosion
Non-Newtonian Properties: Gets stronger under stress — maximum protection during high-load conditions

📋 How to Use Cermax 0W-20

💡 For Best Results:

For maximum protection, first treat your engine with Cerma STM-3 Engine Treatment (a one-time permanent treatment), then use Cermax 0W-20 for all subsequent oil changes. The engine treatment creates the initial deep ceramic bond, and Cermax oil continuously reinforces it. Check our Value Packages for bundled savings on treatment + oil.

Check Capacity: Refer to your owner's manual for your engine's exact oil capacity and confirm 0W-20 is the recommended viscosity.
Drain Old Oil: Warm your engine, then drain existing oil and replace the oil filter.
Fill with Cermax: Add the correct amount of Cermax Ceramic 0W-20 Synthetic Motor Oil.
Drive & Enjoy: Drive normally. Cermax provides up to 30,000 miles of protection per oil change.
Do Not Mix Additives: Cermax is a complete protection system. Do not add any other oil additives or treatments.

📋 Specifications & Certifications

Specification	Details
Viscosity Grade	SAE 0W-20
API Service Rating	API SN, SM
ILSAC Rating	GF-5
Oil Change Interval	Up to 30,000 miles
Core Technology	STM-3 Nano Silicon Carbide (SiC) Run Clean Technology
SiC Hardness	Mohs 9.5
SiC Melting Point	2,730°C
Turbo/Supercharger Safe	Yes — all induction engines
Formula	PTFE-free, solvent-free, environmentally safe
Made In	USA

🚗 Compatibility

Vehicle / Engine Type	Compatible
Toyota / Lexus (Camry, Corolla, RAV4, Highlander, Prius, Tacoma)	✅ Yes — most newer Toyota engines spec 0W-20
Honda / Acura (Civic, Accord, CR-V, Pilot, HR-V, RDX)	✅ Yes — newer Honda models spec 0W-20
Subaru (Outback, Forester, Crosstrek, WRX, Ascent)	✅ Yes
Hyundai / Kia (newer models specifying 0W-20)	✅ Yes
Ford (newer EcoBoost, Maverick, Escape, Bronco Sport)	✅ Yes (verify owner's manual)
GM / Chevrolet (newer models specifying 0W-20)	✅ Yes
Nissan / Infiniti (newer models specifying 0W-20)	✅ Yes
Hybrid & Plug-In Hybrid Gasoline Engines	✅ Ideal — 0W-20 is the standard hybrid viscosity
Turbocharged & Supercharged Gasoline Engines	✅ Yes — all induction motors
Multi-Valve Fuel Injected Engines	✅ Yes
Cars, SUVs, Trucks, Vans	✅ Yes
Meets API SN/SM & ILSAC GF-5 Requirements	✅ Yes

⚠️ Important: Only use 0W-20 if your vehicle manufacturer specifically recommends this viscosity. Using a thinner oil than specified can reduce protection. If your manual calls for 5W-20 or 5W-30, see our other Cermax viscosity options.

🛡️ Cermax 0W-20 vs. Leading Synthetic Oils

Feature	Cermax 0W-20	Premium Full Synthetic	Conventional Oil
Oil Change Interval	Up to 30,000 miles	7,500–15,000 miles	3,000–5,000 miles
Ceramic SiC Technology	✅ Yes	❌ No	❌ No
Self-Cleaning Action	✅ Run Clean Technology	Limited detergents	❌ No
Cold-Start Protection	Fastest (0W)	Good (5W typical)	Slower flow
Fuel Economy Benefit	Maximum (0W-20 + SiC)	Good	Limited
Restores Compression	✅ Yes	❌ No	❌ No
Cost Per Mile	Lowest (fewer changes)	Moderate	Highest (frequent changes)

🔗 Complete Your Cerma Engine Protection

Cerma STM-3 Gas Engine Treatment — one-time permanent ceramic treatment (recommended before first Cermax oil change)
All Cermax Motor Oil Viscosities — 0W-20, 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, 20W-50
Cerma Transmission Treatments — automatic and manual transmission ceramic protection
Cerma Gas Fuel Treatment — clean injectors and improve fuel economy
Cerma Turbo Nano Treatment — ceramic protection for turbochargers
Cerma Power Steering Treatment — protect power steering systems
Cerma Blue Ice A/C Treatment — improve A/C performance
Cerma Gear Box & Axle Treatment — protect differentials and gear sets

❓ Frequently Asked Questions

What makes Cermax 0W-20 different from regular synthetic oil?

Cermax contains STM-3 Run Clean Technology with Nano Silicon Carbide (SiC) — a ceramic compound nearly as hard as diamond (Mohs 9.5). Unlike conventional synthetics that only lubricate, Cermax permanently bonds a ceramic matrix to your engine's metal surfaces, continuously cleans deposits, and prevents contaminant buildup. This is why it achieves up to 30,000-mile drain intervals while making your engine cleaner over time.

Can I really go 30,000 miles between oil changes?

Yes. Cermax Ceramic Synthetic Motor Oil is engineered for up to 30,000-mile drain intervals under normal operating conditions. The SiC technology helps the oil maintain its protective and cleaning properties far longer than conventional synthetics. We recommend periodic oil analysis to confirm the optimal interval for your specific driving conditions.

Do I need the Cerma Engine Treatment too, or just the oil?

For maximum results, we recommend starting with the Cerma STM-3 Engine Treatment (a one-time, permanent treatment) before switching to Cermax oil. The engine treatment creates the initial deep ceramic bond, and Cermax oil continuously reinforces it. However, Cermax oil provides significant benefits on its own — the SiC technology will build ceramic protection over time with each oil change.

Which vehicles use 0W-20 motor oil?

0W-20 is increasingly the factory-fill viscosity for modern vehicles. It is standard for most newer Toyota/Lexus models, Honda/Acura, Subaru, many Hyundai/Kia vehicles, and newer models from Ford, GM, and Nissan. It is also the standard viscosity for most hybrid vehicles (Toyota Prius, RAV4 Hybrid, Honda CR-V Hybrid, etc.). Always confirm in your owner's manual.

Is 0W-20 too thin to protect my engine?

No — when specified by your vehicle manufacturer. Modern engines are engineered with tighter tolerances that benefit from thinner oils. The "0W" rating means the oil flows faster at cold temperatures for instant startup protection, while the "20" rating provides proper film strength at operating temperature. Cermax 0W-20 adds an extra layer of security with the permanent SiC ceramic bond — so even with an ultra-thin oil, your engine has diamond-hard ceramic protection at the metal surface level.

Is Cermax 0W-20 good for hybrid vehicles?

Cermax 0W-20 is ideal for hybrids. Hybrid engines cycle on and off frequently, which means more cold starts per trip and more opportunities for wear during startup. The ultra-fast cold-flow properties of 0W-20 combined with the permanent SiC ceramic protection means your hybrid engine is protected from the instant it starts — even after sitting idle while the electric motor was driving.

What does "self-cleaning" oil mean?

Cermax's STM-3 Run Clean Technology applies a Nano SiC matrix that prevents sludge, carbon deposits, and contaminants from adhering to metal surfaces. Unlike conventional detergent-based oils that suspend particles until they're overwhelmed, Cermax creates a ceramic barrier at the molecular level that actively repels deposit formation. Your engine actually gets cleaner the longer you run Cermax oil.

Is Cermax available in other viscosities?

Yes. Cermax Ceramic Synthetic Motor Oil is available in multiple viscosity grades including 0W-20, 5W-20, 5W-30, 10W-30, 10W-40, 15W-40, and 20W-50. Visit our Motor Oil collection to find the right viscosity for your vehicle.